Prima Plana

 

El acero dulce prima plana igualmente que han llamado pm caducado o placas de acero fundido placa plana se utilizan en diversas aplicaciones estructurales, el cuerpo de la maquinaria, etc.

Mehta fornido de aceros de construcción es de grado ms plana probado según Norma de la India IS 2062 E 250 Br, IS 250 2062 E que B0 son considerados como placas de trenes de chapa de calidad estructural.

MS plana suministrados por Mehta aceros se fabrican en la plataforma de clase mundial con molinos mayoría de las normas de control de calidad riguroso.

 

Los tamaños comunes de placas de acero templado son fácilmente disponibles en stock con aceros Mehta son:

 

  • THICK (mm)
    WIDTH (mm)
    LENGTH (mm)
  • 10.2
    2500
    12500
  • 12
    2500
    12500
  • 14
    2500
    12500
  • 16
    2500
    12500
  • 18
    2500
    12500
  • 20
    2500
    12500
  • 22
    2500
    12500
  • 25
    2500
    12500
  • 28
    2500
    12500
  • 30
    2500
    12500
  • 32
    2500
    12500
  • 36
    2500
    12500
  • 40
    2500
    12500
  • 45
    2500
    10000
  • 50
    2500
    10000
  • 63
    2500
    6300
  • 70
    2500
    6300
  • 75
    2500
    6300
  • 80
    2500
    5000
  • 90
    2500
    5000
  • 100
    2500
    5000
  • 110
    2000
    5000
  • 120
    2000
    5000
Los grados estructurales comunes de las placas del ms en la acción con los aceros de Mehta son:
  • IS 2062 E 250 A
  • IS 2062 E 250 BR
  • IS 2062 E 250 B0
  • IS 2062 E 250 C
  • IS 2062 E 275 A
  • IS 2062 E 275 BR
  • IS 2062 E 275 B0
Acero estructural

Uso y tabla de grado equivalente de placas de acero templado

  • Description of use
    IS standard No and grade
    Near Equivalent Non IS Specification
  • IS 2062 E 250 A
    ASTM A 36
  • IS 2062 E 250 A
    ASTM A 283 Gr.D / SA 283 Gr.D
  • IS 2062 E 250 BR
    ASTM A 573 Gr 58 / SA 573 Gr 58
  • IS 2062 E 250 BR
    A / SA 573 Gr 65
  • IS 2062 E 250 BR
    EN 10025 S 235 JR
  • Hot rolled medium structural steel
    IS 2062 E 250 B0
    EN 10025 S 235 J0
  • IS 2062 E 250 C
    EN 10025 S 235 J2
  • IS 2062 E 275 BR
    EN 10025 S 275 JR
  • IS 2062 E 275 B0
    EN 10025 S 275 J0
  • IS 2062 E 275 C
    EN 10025 S 275 J2
  • IS 2062 E 250 A
    DIN 17100 St 37.2 , St 44.2
Condiciones de entrega técnicas obligatorias para las placas
Condiciones de entrega técnicas obligatorias para las placas
MANDATORY REQUIREMENTS FOR MILD QUALITY GRADES
Nomenciature Mandatory TDC As per Specification Mandatory TDC As per Process requirement
IS 2062 E 250 A TENSILE , BEND TEST Vacuum degassing for > = 40 mm
IS 2062 E 250 BR TENSILE, BEND, (IMPACT OPTIONAL AT ROOM TEMP). FOR>= 12 MM Vacuum degassing for > = 40 mm
Micro alloying for > 100 mm
IS 2062 E 250 B0 TENSILE , BEND TEST & IMPACT AT (0) DEG C FOR>= 12 MM Normalized for >= 20 mm
Vacuum degassing for >= 40 mm
Micro alloying for > 100 mm
IS 2062 E 250 C TENSILE , BEND TEST & IMPACT AT (-)20 DEG C FOR>= 12 MM Normalized for >= 12 mm
Vacuum degassing for >= 40 mm
Micro alloying for > 100 mm
IS 2062 E 275 A TENSILE , BEND TEST Vacuum degassing for >= 40 mm
IS 2062 E 275 BR TENSILE, BEND, (IMPACT OPTIONAL AT ROOM TEMP). FOR>= 12 MM Vacuum degassing for >= 40 mm
Micro alloying for > 100 mm
IS 2062 E 275 B0 TENSILE , BEND TEST & IMPACT AT (0) DEG C FOR>= 12 MM Normalised for >= 20 mm
Vacuum degassing for >= 40 mm
Micro alloying for > 100 mm
IS 2062 3 275 C TENSILE , BEND TEST & IMPACT AT (-)20 DEG C FOR>= 12 MM Normalised for >= 12 mm
Vacuum degassing for >= 40 mm
Micro alloying for > 100 mm
Tdc obligatorio para placas especiales de acero especial
Condiciones de entrega técnicas obligatorias para las placas
MANDATORY REQUIREMENTS FOR MILD QUALITY GRADES
Nomenciature Mandatory TDC As per Specification Mandatory TDC As per Process requirement
SAIL COR TENSILE , BEND TEST Vacuum degassing for all thickness.
IRS M 41 TENSILE , BEND TEST Vacuum degassing for all thickness.
SAIL – HITEN TENSILE , BEND , UNTRIMMED, Vacuum degassing for all thickness.
CR/TCR
SAIL – HARD HARDNESS 200 BHN MAX, UNTRIMMED
LRS Gr A TENSILE ONLY , INSPECTION :LRA, Vacuum degassing for >= 40 mm
LRS Gr B TENSILE TEST , IMPACT FOR ABOVE 25 MM PLATES Vacuum degassing for >= 40 mm
LR DH 36 TENSILE , IMPACT (-) 20 DEG C , INSP. AGENCY : LRA Vacuum degassing for > 32 mm
Normalised for all thickness
JIS G 3114-490 BWN TENSILE TEST , IMPACT TEST AT 0 DEG C, NORMALISED Vacuum degassing for all thickness.
DIN 10025-5 S 355 JOW+N TENSILE + IMPACT (0) DEG C Vacuum degassing for all thickness.
Normalised Rolling upto 32 mm
Normalised for > 32 mm
Micro alloyed for all thickness
DIN 10025-5 S 355 J2W+N TENSILE + IMPACT (-) 20 DEG C Vacuum degassing for all thickness.
Normalised Rolling upto 32 mm
Normalised for > 32 mm
Micro alloyed for all thickness
ASTM A 204 Gr A/B/C TENSILE ONLY Vacuum degassing for all thickness.
Normalised for > 12 mm
ASTM A 242 Type 1 TENSILE ONLY Vacuum degassing for all thickness.
Normalised for > 12 mm
ASTM A 588 Gr A TENSILE ONLY Vacuum degassing for all thickness.
ASTM A 387 TENSILE ONLY Vacuum degassing for all thickness.
BS/DIN EN 10028: 16 MO 3 TENSILE TEST. IMPACT (TRANSEVERSE), HIGH TEMP. TENSILE TEST. Vacuum degassing for all thickness.
Normalised for all thickness.
Condiciones de entrega técnicas obligatorias para las placas
MANDATORY REQUIREMENTS FOR MILD QUALITY GRADES
Nomenciature Mandatory TDC As per Specification Mandatory TDC As per Process requirement
BS/DIN EN 10028: P 235 GH TENSILE TEST. IMPACT (TRANSEVERSE), HIGH TEMP. TENSILE TEST. Vacuum degassing for all thickness.
Normalised for all thickness.
BS/DIN EN 10028: P 265 GH TENSILE TEST. IMPACT (TRANSEVERSE), HIGH TEMP. TENSILE TEST. Vacuum degassing for all thickness.
Normalised for all thickness.
BS/DIN EN 10028: P 275 NL 1 TENSILE TEST. IMPACT (TRANSEVERSE), HIGH TEMP. TENSILE TEST. Vacuum degassing for all thickness.
Normalised for all thickness.
BS/DIN EN 10028: P 355 NL 1 TENSILE TEST. IMPACT (TRANSEVERSE), HIGH TEMP. TENSILE TEST. Vacuum degassing for all thickness.
Normalised for all thickness.
BS/DIN EN 10028: P 355 N TENSILE TEST. IMPACT (TRANSEVERSE), HIGH TEMP. TENSILE TEST. Vacuum degassing for all thickness.
Normalised for all thickness.
DMR GR A TENSILE TEST , BEND TEST , IMPACT TEST , TCR/NORMALISED INSP. : DQA Vacuum degassing for all thickness.
Normalised